Compact Welfare for motor vehicles

For hot water hand washing in welfare vehicles

The Compact Welfare water heater for motor vehicles is made from a durable ABS covered steel carcass. It’s fully automatic and only powers up when the battery is fully charged and the engine is running – so there is no drain on the battery.

The Compact Welfare is suitable for electric, diesel and petrol powered motor vehicles

12V version of the Compact Welfare: 180W, 15A.   24V version of the Compact Welfare: 250W, 12A.

Van fitters: fitting information and support documentation for Teal motor vehicle hand washing sinks »

12v and 24v Compact Welfare full user manual »

The Teal Compact Welfare water heater for motor vehicles allows washing under hot running water that is tightly temperature controlled, to give a most hygienic and comfortable wash.

Compact Welfare Factsheet »

The unit simply connects to the vehicle’s electricity supply, ensuring that hot water is always to hand. Waste water drops into the vehicle’s existing basin or sink.

Vehicle Certification Agency

• Conformity of Production Statement »
• Teal accreditation – E11*10R05/01*5528*02 »

Euro 6 compliant wiring and control

Teal vehicle units incorporate 3 wire technology. Standard battery positive – red wire, earth wire – black. The white wire is to be connected to the ignition control fuse.

Standard CW12

• When the vehicle is turned off, the battery state is quiescent at 12V.
• When switched on the Ignition control wire detects vehicle turned on. The voltage sensing software will turn the heater on when 12.6 volts are detected. Thereafter the heater will be monitored by the built in thermistor and control the water temperature at 38-40ºC. When the vehicle is switched off the unit will switch off having sensed the battery voltage has dropped to 12.3V and the ignition signal has been dropped. The battery will not be therefore be drained by the Compact Classic.

Standard CW24

• When the vehicle is turned off the battery state is quiescent at 24V.
• When switched on the Ignition control wire detects vehicle turned on. The voltage sensing software will turn the heater on when 25.6 volts are detected. Thereafter the heater will be monitored by the built in thermistor and control the water temperature at 38-40ºC. When the vehicle is switched off the unit will switch off having sensed the battery voltage has dropped to 25.1V and the ignition signal has been dropped. The battery will not be therefore be drained by the Compact Classic.

Leaflet: the complete range of hand washing units for motor vehicles »