Clean hands on the move with Teal’s Compact Classic hot water hand wash unit.
It combines the advantages and durability of brushed stainless steel finish with the latest Teal electronic control, making it an ideal unit for motor vehicles.
12V version of the Compact Classic: 180W, 15A. 24V version of the Compact Classic: 250W, 12A.
Vehicle Certification Agency
- Teal accreditation – E11*10R05/01*5528*02.
- Hand wash units for motor vehicles – Conformity of Production Compliance Statement.
12v and 24v Compact Classic full user manual »
The Teal Compact Classic for motor vehicles allows washing under hot running water that is tightly temperature controlled to give a most hygienic and comfortable wash.
Compact Classic Factsheet »
Compact Classic cleaning instructions »
The multi jet spray tap head with finger tip control, ensures an even spread of water and a excellent wash can be achieved in ten seconds using only a wineglass full of water. There’s no need to mix hot and cold water and no need to fill the bowl.
Teal portable hand wash units – why Legionella is not a concern »
Euro 6 compliant wiring and control
Teal vehicle units incorporate 3 wire technology. Standard battery positive – red wire, earth wire – black. The white wire is to be connected to the ignition control fuse.
Standard CC12
- When the vehicle is turned off, the battery state is quiescent at 12V.
- When switched on the Ignition control wire detects vehicle turned on. The voltage sensing software will turn the heater on when 12.6 volts are detected. Thereafter the heater will be monitored by the built in thermistor and control the water temperature at 38-40ºC. When the vehicle is switched off the unit will switch off having sensed the battery voltage has dropped to 12.3V and the ignition signal has been dropped. The battery will not be therefore be drained by the Compact Classic.
Standard CC24
- When the vehicle is turned off the battery state is quiescent at 24V.
- When switched on the Ignition control wire detects vehicle turned on. The voltage sensing software will turn the heater on when 25.6 volts are detected. Thereafter the heater will be monitored by the built in thermistor and control the water temperature at 38-40ºC. When the vehicle is switched off the unit will switch off having sensed the battery voltage has dropped to 25.1V and the ignition signal has been dropped. The battery will not be therefore be drained by the Compact Classic.
